The DASH Flex 12 STAT centrifuge goes the extra mile to shorten turnaround time. Green lid lights are visible from across the lab and indicate when the unit is done (flashing), still running (on) or ready (off), reducing the chance that specimens are left waiting or forgotten. 10 cycles can be programmed in memory for acceleration, deceleration, speed, g-force, and runtime, and are shown on the digital display, along with the time remaining in the cycle.

Features

• Monitor time remaining on the digital display
• Program up to 10 custom time and speed settings
• LED lid lighting indicates cycle status
• Capacity – Up to twelve (12) tubes
• Tube Sizes – Up to 75-100 mm (3-10 mL)
• Digital Display – Clearly see your custom parameters and the time left in each cycle
• Fully Programmable – Easily set and save up to 10 custom time, RPM, and g-force settings
• LED Lid Lighting – Lid lights flash at the end of each cycle and continue flashing until the lid is opened
• 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
• Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
• Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
• Brushless DC Motor – Years of operation with no routine maintenance
• Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
• Reinforced Guard Bowl – Provides maximum safety and durability
• Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards

Specifications

• Height – 9 in. (23 cm)
• Width – 13 in. (32 cm)
• Depth – 15 in. (38 cm)
• Weight – 30 lbs. (13.7 kg)
• Capacity - 12 x 75-100 mm (3-10 mL)
• Max. Acceleration Time – 35 Seconds
• Max. Deceleration Time – 40 Seconds
• Factory Setting Range – 1 to 30 Minutes (± 1%)
• Voltage – 95 to 253 VAC
• Frequency – 50/60 Hz
• Max. Power Requirements – 230 Watts
• Centrifuge Motor – 1/2 H.P. Brushless DC
• Warranty - 2 years (lifetime on rotor)