Enbio S Autoclave 120V
Compact Class B Vacuum Steam Sterilizer, 8 Pouch Capacity

The Enbio S is a compact Class B vacuum steam autoclave built for clinics that need fast instrument turnaround in a small footprint. It runs a 7 minute FAST cycle for unwrapped instruments and a 15 minute wrapped cycle with drying at 134°C. That lets practices reprocess instruments between patients instead of waiting through the 45 to 60 minute cycles typical of conventional tabletop units. The unit is only 25 cm wide and 15.8 cm tall, holds up to 8 sterilization pouches per load, and uses fractionated vacuum to remove air so steam can penetrate hollow, cannulated and complex instruments. Unlike most tabletop autoclaves, the Enbio S has no internal water reservoir. It draws distilled or demineralized water from an external container, so no plumbing is required, but facilities should plan counter or cabinet space for the water supply beside the unit. Every cycle is automatically recorded to USB, and the included Enbio Data Viewer software generates printable process reports for sterilization record-keeping. The Enbio S is designed in Switzerland by Enbio Group AG and is suited to medical clinics, dental practices and procedure rooms.

Important: External Water Supply

The Enbio S does not have a built-in water tank. It operates from an external water container using distilled or demineralized water with a conductivity below 15 µS/cm. Before ordering, confirm there is space next to the unit for the external water supply and that your facility can maintain a supply of water meeting this specification.

Key Features

• 7 minute FAST cycle at 134°C (273°F) for unwrapped instruments
• 15 minute Class B vacuum cycle at 134°C (273°F) for wrapped instruments, including drying
• 45 minute Class B vacuum cycle at 121°C (250°F) for heat-sensitive wrapped loads
• Fractionated vacuum air removal for hollow and complex instruments
• Compact countertop footprint at 25 cm wide
• Holds up to 8 sterilization pouches per cycle
• External water supply with no plumbing connection required
• Automatic cycle data recording to USB
• Enbio Data Viewer software included for generating and printing process reports
• Touchscreen interface with one-touch program selection
• LED lighting indicates current cycle status
• Quiet operation at 38 dB
• Plugs into a standard electrical outlet

Specifications

• Brand: Enbio
• Model: Enbio S
• SKU: 1133460
• Autoclave class: Class B (vacuum)
• Sterilization programs: FAST 134°C / 7 min (unwrapped); 134°C / 15 min (wrapped, with drying); 121°C / 45 min (wrapped)
• Capacity: Up to 8 pouches (approx.)
• Maximum recommended batch weight: 0.5 kg (1.1 lb)
• Process chamber volume: 2.7 L
• External dimensions (L x W x H): 56 x 25 x 15.8 cm (22 x 9.8 x 6.3 in)
• Working pressure: 2.1 bar (30.5 psi)
• Maximum pressure: 2.3 bar (33.4 psi)
• Maximum process temperature: 137°C (278.6°F)
• Power supply: 110-120 V / 60 Hz
• Installed power: 3.23 kW
• Maximum power consumption: 15 A
• Water supply: External container, distilled or demineralized water
• Water conductivity: Below 15 µS/cm
• Data archiving: Automatic to USB
• Ingress protection: IP20
• Noise level: 38 dB
• Manufacturer: Enbio Group AG, Switzerland

Frequently Asked Questions

How fast is the Enbio S autoclave?
The FAST program sterilizes unwrapped instruments at 134°C in 7 minutes. The wrapped 134°C cycle, including drying, takes 15 minutes. The wrapped 121°C cycle takes 45 minutes.

Does the Enbio S have a water tank?
No. The Enbio S has no internal water reservoir. It draws water from an external container, which means no plumbing is required, but space is needed beside the unit for the water supply.

What type of water does the Enbio S use?
The Enbio S requires distilled or demineralized water with a conductivity below 15 µS/cm.

What class of autoclave is the Enbio S?
The Enbio S is a Class B vacuum steam autoclave. Fractionated vacuum removes air from the chamber so steam can penetrate wrapped loads and instruments with hollows or complex shapes.

How many instruments can the Enbio S hold?
The chamber holds up to 8 sterilization pouches per cycle, with a maximum recommended batch weight of 0.5 kg (1.1 lb). The load space measures 28 x 18 x 3.3 cm.

How does the Enbio S record sterilization cycles?
All process data is automatically written to a USB drive. The included Enbio Data Viewer software generates and prints detailed process reports from that data.

Does the Enbio S need special electrical installation?
The Enbio S runs on 110-120 V / 60 Hz power and plugs into a standard electrical outlet.

Is the Enbio S suitable for high-volume sterilization?
The Enbio S is designed for fast turnaround of smaller loads. For higher instrument volume, the Enbio Pro offers a larger chamber with approximately twice the capacity.