Welch Allyn Connex 360 Vital Signs Monitor
94CXT-B - SureBP, Nellcor SpO2, SureTemp Thermometry

The Welch Allyn Connex 360 is a next-generation, connected vital signs monitor built for low- to mid-acuity acute care environments. Designed with a profile-free workflow and a large 12.1-inch colour capacitive touchscreen, it allows clinical teams to capture and document a complete set of vitals in under one minute, and send results directly to the EMR without manual transcription.

This configuration (94CXT-B) includes Nellcor SpO2 technology and the SureTemp Plus oral/axillary/rectal thermometer, and features Welch Allyn's proprietary SureBP 20-second non-invasive blood pressure technology.

Key Features At A Glance

• 12" Colour Touchscreen
• Continuously measure SpO2 and pulse rate with refreshed data once per second
• Customizable intervals monitoring programs for timed NIBP measurements and BP/PR averaging
• Profile-free intuitive navigation
• Take and document a full set of vitals in less than one minute and automatically send to the EMR
• Apply customizable Early Warning Score protocols (eg. MEWS, PEWS, NEWS2) to help detect patient deterioration and help provide clinical direction
• Document up to 20 fields of patient information for comprehensive bedside workflows

Key Clinical Parameters

The Connex 360 94CXT-B monitors the following parameters across adult, paediatric, and neonatal patient populations:

• Blood pressure: NIBP via SureBP (typical determination in 15 seconds) and StepBP; systolic, diastolic, and MAP
• SpO2: Nellcor pulse oximetry with 1-second refresh rate; measurement range 1–100%
• Temperature: SureTemp Plus predictive and direct modes; oral, axillary, and rectal measurement sites; range 26.7–43.3°C
• Pulse rate: continuous measurement with 1-second refresh

Profile-Free Workflows and Monitoring Modes

Unlike traditional vital signs monitors that require patient profile setup before use, the Connex 360 is designed for profile-free operation — reducing steps and supporting faster assessments at the bedside. Available monitoring modes include:

• Spot check — single point-in-time vitals capture
• Intervals monitoring — timed NIBP measurements with continuously measured SpO2 and pulse rate
• BP/PR averaging — multiple readings averaged for clinical accuracy

Up to six custom interval protocols can be configured to match facility workflows.

EMR Connectivity and Documentation

The Connex 360 automatically transfers patient vital signs data to the electronic medical record (EMR) via Baxter DeviceBridge, Connex CS/CSAS, HL7 Direct, or NCE — eliminating manual entry and reducing transcription errors. Wired connectivity is via Ethernet (RJ-45); wireless-enabled configurations are also available (see 95CXT-B).
Clinicians can document up to 20 additional fields at the bedside, including pain scale and intake and output (I&Os), for more comprehensive patient records. Imprivata Single Sign-On (SSO) and badge-tap authentication are supported for streamlined, secure clinician access.

Early Warning Scoring

The Connex 360 supports up to six customisable Early Warning Score protocols — including MEWS, PEWS, and NEWS2 — configurable via the Welch Allyn Product Configuration Tool. Custom scoring protocols and parameter modifiers allow facilities to implement their own clinical deterioration detection workflows.

Security and Compliance

The Connex 360 was developed with end-to-end security from design through deployment. Security features include:

• FIPS-approved encryption for data in transit
• TLS 1.3 and WPA3 support
• Trusted Platform Module (TPM) for hardware-level security
• High Assurance Boot (Secure Boot)
• Hardened Linux OS kernel with mandatory access controls (SELinux)
• Imprivata-ready authentication

The device meets IEC 60601-1, ISO 81060-2, IEC 60601-1-8, and related standards. Ingress protection rating: IP22. Degree of protection: Type BF defibrillator proof.

Specifications

• Display: 12.1" (307 mm) projected capacitive touchscreen, 1280 × 800 px, anti-glare tempered glass
• Dimensions: 9.43" H × 15.96" W × 6.07" D (239 × 406 × 154 mm)
• Weight: 12 lb / 5.44 kg (with battery)
• Battery: 9-cell lithium-ion; up to 9.78 hours operating time; recharges to 95% in 6 hours
• Memory: 400 readings
• Connectivity: Ethernet (wired); optional Wi-Fi (see 95CXT-B)
• Accessories supported: Barcode scanner (1D/2D), RFID
• Mounting: Cable Management Stand or Wall Mount

Rx only. For safe and proper use, refer to the Connex 360 Instructions for Use. Not all parameters are indicated for all paediatric patient populations.